- VTL's / VBM's / HBM's
VTL's / VBM's / HBM's
![](files/2157_thumb.jpg)
17 ft Skoda SK-50A Vertical Boring Mill w/(2) Swivelling Ram Heads, Tracer, Side Head, and Hydrostatic Bearings
Model: SK-50A
Condition: Used
Manufacturer: Skoda
Condition: Used
Manufacturer: Skoda
Still installed, this Mill is in very good working condition and is available for immediate inspection and delivery.
Table Diameter | 4,750mm (187) |
Max Turning Diameter-Rams | 5,180mm (204") |
Max Height Under Cross Rail | 3,264mm (128-1/2") |
Max height under live tool | 3,050mm (120-1/16") |
Left Ram Vertical Travel | 55-1/8" |
Left Ram Horizontal Travel | 116-7/8" |
Vertical Ram Swivel | +/- 30 to 45 Degrees |
Distance between columns | 204-3/4 |
Dimensions F-B/L-R/H | 8370 x 12598 x 9881mm |
Machine Weight | 134 Tons (295,000 Lbs)" |
Equipped with:
•(2) Swivelling Ram Heads
•Side Head
•2-Axis Newall DP7 Digital Readout System
•Threading Attachment Inch/Metric
•Electronic Tracer
•Conical Turning
•Constant Surface Cutting Speed
•Hydrostatic Table Bearings
•80 kW Table Drive GE Variable Speed Drive
•Pendant Control
•(2) Swivelling Ram Heads
•Side Head
•2-Axis Newall DP7 Digital Readout System
•Threading Attachment Inch/Metric
•Electronic Tracer
•Conical Turning
•Constant Surface Cutting Speed
•Hydrostatic Table Bearings
•80 kW Table Drive GE Variable Speed Drive
•Pendant Control
![](files/1903_thumb.jpg)
4,640mm (182.7") Morando KS-42-50 Heavy Duty Vertical Turret Lathe Re:23533
Model: KS-42-50
Condition: Used
Manufacturer: Morando
Condition: Used
Manufacturer: Morando
Still installed, this VTL may be inspected on request.
Swing | 4,640mm (182.7") |
Height | 5,150mm (202.8") |
Table dia | 4,267mm (168") |
Workpiece weight | 175,000 lbs |
Main drive motor | 100hp |
Table RPM | 40 rpm |
Cross-rail motor | 22hp |
Rising motor | 25hp |
0
![](files/23955.jpg)
5' Hearth diameter O'Brien & Gere Rotary Hearth Furnace for heating Blanks prior to Forging Re:23955
Model: Re:23955
Manufacturer: O'Brien & Gere
Manufacturer: O'Brien & Gere
Built new in 1996, this Rotary Hearth Furnace has been removed from service and is available for immediate inspection and delivery.
Reference # | 23955 |
Manufacturer | O'Brien & Gere |
Model | RHBF |
Furnace work chamber | Hearth diameter - 5' |
Furnace work chamber | inside height - 18" |
Furnace work chamber | max piece height - 6.5" |
Controls zones | Two (2) |
Max temperature | 2,350 deg F |
Floor to door sill | 48: (adj /- 1-1/2") |
Furnace external diameter | 10' |
Furnace external height | 9' |
Type of fuel | Natural Gas |
Furnace weight | 15,000 lbs |
It was designed to heat the following blanks:
•Anticipated part size 1-3/4" round x 6" long
•Furnace part rate 120 pieces/hour
•Anticipated material Hastalloy X, Titanium, Stainless Steel, Inconel
•Anticipated part size 1-3/4" round x 6" long
•Furnace part rate 120 pieces/hour
•Anticipated material Hastalloy X, Titanium, Stainless Steel, Inconel
![](files/23869.jpg)
50 Ton Mavilor Hydraulic Traveling Frame 4-Post Straightening Press previously used for Straightening Crankshafts, Re:23869
Model: Re:23869
Condition: Used
Manufacturer: Mavilor
Condition: Used
Manufacturer: Mavilor
In excellent condition, this press is available for immediate inspection and delivery. It may be inspected at our Massachusetts warehouse.
Reference # | 23869 |
Manufacturer | Mavilor |
Model | N/A |
Rated straightening force | 50 tons |
Distance between the tailsocks | 1,778mm (70") |
Press ram diameter | 130mm(5-1/8") |
Number of press columns | Four (4) |
Columns diameter | 3-1/8" |
Method of travel | Press moves along carriage |
Number of Tail stocks | Two (2) |
Between the columns | 23-1/2" W x 36-1/4" L |
Max allowable swing | approx 16" |
Dims | 110" L x 36" W x 86" H |
![](files/1915_thumb.jpg)
66" Bullard Dynatrol Vertical Boring Mill Re:23602
Model: 66
Condition: Used
Manufacturer: Bullard
Condition: Used
Manufacturer: Bullard
Still installed, this Mill is in very good working condition and is available for immediate inspection and delivery.
Max swing w/side head working | 66" |
Swing w/s-head below table top | 72" |
Min hole ram will enter | 78" |
Centerline Ram-face of bedways | 9-1/2" w/o turret |
Cross rail travel | 131" |
Ram head vert travel (ranges) | 50" |
Side head vertical travel | 51-3/8" |
Side head horizontal travel | 58-1/4" |
Net weight w/cross rail | 74,000 lbs less heads/motors |
It comes complete with Vertical Hydraulic Chuck, "9" Series Allen Bradley Controls, Side Head and a 75hp Main motor drive.
![](files/23870.jpg)
75 ton Traveling Frame 2-Post Hydraulic Straightening Press previously used for straightening crankshafts Re:23870
Model: Re:23870
Condition: Used
Manufacturer: Mavilor
Condition: Used
Manufacturer: Mavilor
In excellent condition, this press is available for immediate inspection and delivery. It may be inspected at our Massachusetts warehouse.
Reference # | 23870 |
Manufacturer | Mavilor |
Model | N/A |
Rated straightening force | 75 tons |
Centers distance range | 1,016 - 5,334mm (40" - 210") |
Ram diameter | 200mm (8") |
Distance between press columns | 1,000mm (40") |
Method of travel | Press moves alongside bed |
Number of tailsocks | Two (2) |
Number of press columns | Two (2) |
Swing | approx 12" |
Ram screw diameter | 4-1/2" |
Dims | 45" W x 236" L x 100"H |
75 ton Hydraulic Straightening Press
Twin Tailsocks
Adjustable Steadies
Press travels alongside the bed
Distance between the press columns is about 1,000mm (40").
Twin Tailsocks
Adjustable Steadies
Press travels alongside the bed
Distance between the press columns is about 1,000mm (40").
![](files/2059_thumb.jpg)
Dorries VCE 2400 MCFV Carousel type Vertical Turning Lathe with driven tools Re:23850
Model: VCE 2400 MCFV
Condition: Used
Manufacturer: Dorries
Condition: Used
Manufacturer: Dorries
This machine was built in the 2008 / 2009 range and is in "Like New" condition. It comes equipped as follows:
Max Swing | 2,400mm |
Face plate | 2,000mm |
Working height | 2,000mm |
Y-Axis | +/- 800mm |
Speed of face plate | 2 ? 224 rpm |
Forward feed | 0,1 ? 6.000mm/min |
Speed of milling spindle | 2 ? 2,000 rpm |
Max workpiece weight | 20,000 kgs |
Tool magazine capacity | 60 tools |
Main motor power | 60kW (92.5hp) |
Accessories:
• Controls - Siemens 840D
• Direct measuring units
• Hydrostatic slideways of linear axis
• Power driven wheel spindle, pole changing 3 kW
• Chip tray over working height
• Double chip conveyor
• Cooling unit, high and low pressure
• Cleaning of coolant with filters
• Controls - Siemens 840D
• Direct measuring units
• Hydrostatic slideways of linear axis
• Power driven wheel spindle, pole changing 3 kW
• Chip tray over working height
• Double chip conveyor
• Cooling unit, high and low pressure
• Cleaning of coolant with filters
![](files/1425_thumb.jpg)
Extra Large (200 ton workpiece weight) Heavy Duty Gantry Milling & Planing Machine - Re: 22870
Model: Type 6650-0-3
Condition: Used
Manufacturer: Uljanovsk
Condition: Used
Manufacturer: Uljanovsk
Built new in the mid 1980's.?
Max workpiece weight | 200 tons (440,000 lbs) |
Table width x length | 5,000 x 16,000mm (16.4 ft x 52.5 ft) |
Max milling width | 5,000mm |
Max milling height | 4,000mm |
Max table travel distance | 17,300mm (56.7 ft) |
Max planning speed | 15,000mm/min (49.2 ft/min) |
Max milling speed | 3,000mm/min (9.8 ft/min) |
Rotation of vertical mandrel | 45 degree angle |
Complete with the following:
• Dbl joint milling head
• Horiz milling head
• Planning head
• Vertical milling head,
• Grinding system/unit
• (2) vibrating units
• (2) lifts w/vert & horiz movement
• Workpiece hoist
• Dbl joint milling head
• Horiz milling head
• Planning head
• Vertical milling head,
• Grinding system/unit
• (2) vibrating units
• (2) lifts w/vert & horiz movement
• Workpiece hoist
![](files/2212_thumb.jpg)
GFM FKP 45 Crankshaft Milling Machine w/CNC Control, Re:24185
Model: FKP 45
Condition: Used
Manufacturer: GFM
Condition: Used
Manufacturer: GFM
Built new in 1989, this machine is in very good working condition and is available for inspection under power on request.
Max crankshaft swing diameter | 470 mm (18.5) |
Max crankshaft length | 5,250 mm (206.7") |
Max circular speed | 3 m/min (118 IPM) |
Rapid traverse for spacing | 6 m/min (236 IPM) |
Milling motor | 110 kW |
Machine length | 12,600 mm |
Machine width | 5,600 mm |
Machine height | 3,500 mm |
Machine weight (w/o electric control box) | 92 tons |
Click on image for more pictures | Add To My Quote Cart |
View My Quote Cart" |
![](files/1904_thumb.jpg)
Heavy Duty 208" Swing Vertical Boring Mills Re:23534 - 35 (2 available)
Condition: Used
Manufacturer: American Style
Manufacturer: American Style
Still installed, These Boring Mills are available for immediate inspection and delivery.
Swing for O.D. turning | 195" |
Max swing at 61" height | 208" |
Open height | 75" |
Height beneath bridge | 153" |
Bridge stroke | 78" |
Load capacity | 200,000 lbs |
Max table RPM | 20rpm |
Feed range | 0.002 - 0.392 |
Rapid traverse | 21.5" min |
Table to column face | 28" |
0
![](files/23985-86.jpg)
Large "T" Slotted Bolster Plates (2) Re:23985-86
Model: Re:23985-86
Manufacturer: N/A
Manufacturer: N/A
These two "T" Slotted Bolster Plates are located at our Massachusetts warehosue where they may be inspected on request.
Reference # | 23985-86 |
Manufaturer | N/A |
Model | N/A |
Overall width (L-R) | 230-1/4" |
Depth at shoe area (F-B) | 103-1/2" |
Depth at mid section (F-B) | 72" |
Plate thickness | 6" |
Mid Pad dims | 9"x9" |
"T" Slot depth | 2" |
End pad dims | 9"x14-3/8" |
Side pad dims | 9"x5-3/4" |
![](files/24152.jpg)
National 1-1/2" High-Duty Upset Forging Machine (Upsetter) - with A/C & Brake & Auto Tong Feed, 1974 Re:24152
Model: Re:24152
Condition: Used
Manufacturer: National
Condition: Used
Manufacturer: National
In very good conditon, this machine is located at our Massachusetts USA warehouse where it may be inspected on request.
Reference# | 24152 |
Manufacturer | National |
Model | 1-1/2" |
Rated diameter capacity | 1-1/2" |
Stroke | 9-1/4" |
Grip Opening | 2-11/16" |
Gather | 4" |
Hold | 1-1/4" |
Length of die space | 10-1/4" |
Height of die space | 12' |
Tool & Die space | 14-1/4" |
Thickness of each die | 5-5/8" |
Net Weight | 27,000 lbs. |
Serial number 25135 - built new in 1974 in Triffin, Ohio.
Equipped with:
•Auto Tong Feed System
•Air Clutch & Brake
•Over-arm suspended heading and gripping slides
•Automatic Pressurized Trabon Lubrication System
•Adjustable motor platform
•V-belts and motor sheave
•Operators Push-Button Control Station
•Machine guarding
Equipped with:
•Auto Tong Feed System
•Air Clutch & Brake
•Over-arm suspended heading and gripping slides
•Automatic Pressurized Trabon Lubrication System
•Adjustable motor platform
•V-belts and motor sheave
•Operators Push-Button Control Station
•Machine guarding
![](files/24149.jpg)
National 1-1/2" High-Duty Upset Forging Machine (Upsetter) - with Air Clutch & Brake, new 1977, Re: 24149
Model: Re:24149
Condition: Used
Manufacturer: National
Condition: Used
Manufacturer: National
In very good conditon, this machine is located at our Massachusetts USA warehouse where it may be inspected on request.
Reference # | 24149 |
Manufacturer | National |
Model | 1-1/2" |
Rated diameter capacity | 1-1/2" |
Stroke | 9-1/4" |
Grip Opening | 2-11/16" |
Gather | 4" |
Hold | 1-1/4" |
Length of die space | 10-1/4" |
Height of die space | 12" |
Tool & die space | 14-1/4" |
Thickness of each die | 5-3/8" |
Net Weight | 24,600 lbs |
Serial number 25146 - built new in 1977 in Triffin, Ohio.
Equipped with:
•Air clutch and brake
•Over-arm suspended heading and gripping slides
•Automatic Pressurized Trabon Lubrication System
•Adjustable motor platform
•V-belts and motor sheave
•Operators Push-Button Control Station
•Machine guarding
Equipped with:
•Air clutch and brake
•Over-arm suspended heading and gripping slides
•Automatic Pressurized Trabon Lubrication System
•Adjustable motor platform
•V-belts and motor sheave
•Operators Push-Button Control Station
•Machine guarding
![](files/vtl 1580.jpg)
VTL 1580 year of manufacture 1967, Kolomna
Manufacturer: Kolomna
Offer:
•Max.work piece dia. 8000mm
•Max. work piece height 3200mm
•Faceplate dia. 7100mm
•Max. travel of the runners of the vertical supports 2000mm
•Max. angular displacement of the supports, degrees - 15 + 30
•Max. work piece weight 125 tons
•Max. cutting effort at the right support 10000kgs
•Max. cutting effort at the left support 8000kgs
•Max. total cutting effort by the two supports 16000kgs
•Max. torque at the faceplate 40000kgm
•RPM of the faceplate - 0,22-18,3
•Limits of the vertical and horizontal feeds - 0,0352-285 mm/min
•The power of the main drive 132kw
•The machine weight 248 tons
•Max.work piece dia. 8000mm
•Max. work piece height 3200mm
•Faceplate dia. 7100mm
•Max. travel of the runners of the vertical supports 2000mm
•Max. angular displacement of the supports, degrees - 15 + 30
•Max. work piece weight 125 tons
•Max. cutting effort at the right support 10000kgs
•Max. cutting effort at the left support 8000kgs
•Max. total cutting effort by the two supports 16000kgs
•Max. torque at the faceplate 40000kgm
•RPM of the faceplate - 0,22-18,3
•Limits of the vertical and horizontal feeds - 0,0352-285 mm/min
•The power of the main drive 132kw
•The machine weight 248 tons
13.01.2013. 11:06
Comments
This article hasn't been commented yet.
Write a comment
* = required field