Other Machinery
1,360 ton 250mm (10") diameter GFM model SXL 25 precision 4-Die Radial Forging Line
Manufacturer: GFM
This SXL 25 was completely rebuilt and upgraded in the late 1990's at which time complete new "state of the art" systems were installed including all new electrics, new PLC controls, new hydraulics and more.
| Reference | 24380 |
| Manufacturer | GFM |
| Model | SXL 25 |
| Total rated Forge tonnage | 1,360 metric tons |
| Max forging round bar diameter | 250 mm(10") |
| Min forging round bar diameter | 50 mm(1.97") |
| Max forging capacity squares | 220 mm(8.7") |
| Min forging diameter squares | 255mm(2.16") |
| Max width x height rectangles | 180 x 30mm (7.1" x 1.2") |
| Max workpiece lenth | 5 mtrs(16.4 ft) |
| Max workpiece weight | 1,200 kgs (2,640 lbs) |
| Main forge motor power | 240kW (322hp) |
| Total installed power | 481.4kW (645.5hp) |
Complete with:
•Mechanical Group consisting of the following:
(4) Forging boxes
(2) Manipulator
(2) Manipulator beds
(1) Billet Charging system
(places billet into work area to be gripped by manipulators)
(1)Discharging system
(1) Inlet roller conveyor system
(1) Outlet roller conveyer system
• Hydraulic sytem
• Lubrication system
• Electrical system including all drive motors and electrical cabinets (480V / 3 / 60Hz)
• Electronic Control System designed, upgraded, built & installed in 1998
•Operator's Control Room w/Special Control Console
Rockwell Automation w/Allen Bradley System)
• Independent Tool Adjustment
• Centering guides
• Block Supports
•Component Change Equipment
• Complete Documentation
It is still installed and under power and may be inspected by appointment.
•Mechanical Group consisting of the following:
(4) Forging boxes
(2) Manipulator
(2) Manipulator beds
(1) Billet Charging system
(places billet into work area to be gripped by manipulators)
(1)Discharging system
(1) Inlet roller conveyor system
(1) Outlet roller conveyer system
• Hydraulic sytem
• Lubrication system
• Electrical system including all drive motors and electrical cabinets (480V / 3 / 60Hz)
• Electronic Control System designed, upgraded, built & installed in 1998
•Operator's Control Room w/Special Control Console
Rockwell Automation w/Allen Bradley System)
• Independent Tool Adjustment
• Centering guides
• Block Supports
•Component Change Equipment
• Complete Documentation
It is still installed and under power and may be inspected by appointment.
4" Farmer Norton HS 400 CBT Hi-Speed Centerless Bar Peeler
Manufacturer: Farmer Norton
This Bar Peeler has been well maintained and is available for immediate inspection and delivery
| Reference | 23350 |
| Manufacturer | Farmer Norton |
| Model | HS 400 CBT |
| Max finished bar dia | 102mm (4") |
| Min finished bar dia | 19mm (3/4") |
| Max bar length | 8.0 mtrs (26.2 ft) |
| Min bar length | 2.3 mtrs (7 ft 6") |
| Max head rpm | 1,900rpm |
| Min head rpm | 200rpm |
| Throughput speed range | 0.3 - 15 mtrs/min (1 - 49 fpm) |
| Main motor | 120hp 500 - 1,500 rpm |
| Hydraulic motor | 25hp 1,440rpm |
| Overall dims | 55 ft L x 21 ft W x 7 ft H |
A.O. Smith 5,000 P.S.I. Free Standing Extra Heavy Pressure Vessel/Accumulator
Manufacturer: A.O. Smith Corp.
This Accumulator Pressure Vessel is in excellent conditon and was recently certified. Capacity is 5,000 P.S.I. It is Free Standing and is 52 feet tall. Net weight of the Vessel is approximately 110,000 lbs.
| Reference | 24383 |
| Manufacturer | A.o. Smith Corp. |
| Rated pressure capacity | 5,000 P.S.I. |
| Overall Length | 52 Feet |
| Diameter | 43 inches |
| Wall Thickness | 5.5" |
| Net weight | 110,000 lbs |
Wall thickness is extremely heavy at 5.5" thick. It is available to be viewed and shipped immediately.
Beche (West Germany) model FBQ 100/2500 a (4") 100mm blank dia x 630mm blank length Vertical Flat Die type Fully Automated Cross
Manufacturer: Beche
Built new in 1993, this Flat Die Cross Wedge Rolling Machine is in Excellent working condition.
| Reference | 24402 |
| Manufacturer | Beche |
| Model | FBQ 100/2500 a |
| Rated rolling diameter | 100mm(4") |
| Max workpiece length | 630mm(24.8") |
| Normal rolling stroke | 2,500mm(98.4") |
| Max rolling stroke | 2,700mm(106.3") |
| Max tangetial rolling force | 315kN(31.6 tons) |
| Max rolling slide speed | 1,200mm/sec(47.2"/sec) |
| Main drive motors x (2) | 160kW (215hp) each |
| operating electrics | 440 volts 3 phase 60 Hx |
| Maachine dims | L-toR 3.2 mtrs(10.5 ft) F-to-B 1.4 mtrs(4.6 ft) |
| Machine net weight | 51 tons(112,200 lbs) |
Machine Dimensions:
•overall height 7.6 mtrs (24.9 ft)
•height above floor level 4.8 mtrs (15.7 ft)
•depth below floor level 2.8 mtrs (9.2 ft)
•machine width L-to-R 3.2 mtrs 10.5 ft
• machine depth F-to-B 1.4 mtrs (4.6 ft)
•total depth of machine including push-in device 4.1 mtrs (13.4 ft)
Weights:
• total weight of machine including die holder 51,000.0 kgs (112,200.0 lbs)
•slideunit RH(w/guide rod & upper & lower bearing 17,180.0 kgs (37,796.0 lbs)
• slide unit LH 17,100.0 kgs (37,620.0 lbs)
• support roller RH 2,300.0 kgs (5,060.0 lbs)
• support roller LH 2,290.0 kgs (5,038.0 lbs)
• die holder (1 set) 2,150.0 kgs (4,730.0 lbs)
•finished part outfeed 560.0 kgs (1,232.0 lbs)
• push-in device 700.0 kgs (1,540.0 lbs)
•steep elevator 1,300.0 kgs (2,860.0 lbs)
•chain, oblique elevator 1,690.0 kgs (3,718.0 lbs)
• hydraulic power unit (approx) 4,600.0 kgs (10,120.0 lbs)
• accumulator station #1 1,790.0 kgs (3,938.0 lbs)
•accumulator station #2 1,100.0 kgs (2,420.0 lbs)
• piping, drive / machine (approx) 1,000.0 kgs 2,200.0 lbs
• switchgear cabinet 900.0 kgs (1,980.0 lbs)
• control console & control panel 150.0 kgs (330.0 lbs)
• cable & piping (approx) 700.0 kgs (1,540.0 lbs)
Complete with:
• Vertical Flat Die Cross Wedge Rolling Machine model FBQ 100 / 2500a
•FICEP (ITALY) Bar Unscrambling/Feeding system
• Roll Feeding system
• AEG-Elotherm ELOMAT 27/1500/1/N-12P 1,500kW Induction Bar Heating system
• Ficep (Italy) CTCH/PLC 100 Hydraulic Inline Bar/Billet Shearing system
1.) 100mm diameter blank with up to 550mm blank length capacity
2.) Hyd counter pressure attachment produces burr-free, cuts even for short cut-off lengths
3.) Billet positioner at Shear exit
4.) Rollerway to receive the cold bars
5.) Rollerway to mount the induction coils
6.) Bar measuring device
7.) Bar weighing device
8.) Bar loading table
9.) Magazine to discharge bars rejected by the heater
10.) Programmable Logic Controls (PLC) at different stages of automation
•Supply Conveyor
• Discharge Conveyor
•Control Console for Bar Heater and Bar/Billet Shear
•Control Console for the Cross Wedge Rolling Machine
•Twenty Three (23) Spare Induction Heater Coils
•Two (2) Spare Guides Shafts for the Cross Rolling System
•Eight (8) Spare Die and Die Holder Sets
•Twenty to Thirty (20 to 30) volumes of documentation and drawings
It is a complete line from Bar Feeding System to finished rolled product. Designed for the Hot Rolling of workpieces up to 100mm in diameter and a max rolled length of 2,500mm, the machine is suitable for producing Preforms, intermediate and finished formed parts.
Note: A video of this machine running production is available on request.
•overall height 7.6 mtrs (24.9 ft)
•height above floor level 4.8 mtrs (15.7 ft)
•depth below floor level 2.8 mtrs (9.2 ft)
•machine width L-to-R 3.2 mtrs 10.5 ft
• machine depth F-to-B 1.4 mtrs (4.6 ft)
•total depth of machine including push-in device 4.1 mtrs (13.4 ft)
Weights:
• total weight of machine including die holder 51,000.0 kgs (112,200.0 lbs)
•slideunit RH(w/guide rod & upper & lower bearing 17,180.0 kgs (37,796.0 lbs)
• slide unit LH 17,100.0 kgs (37,620.0 lbs)
• support roller RH 2,300.0 kgs (5,060.0 lbs)
• support roller LH 2,290.0 kgs (5,038.0 lbs)
• die holder (1 set) 2,150.0 kgs (4,730.0 lbs)
•finished part outfeed 560.0 kgs (1,232.0 lbs)
• push-in device 700.0 kgs (1,540.0 lbs)
•steep elevator 1,300.0 kgs (2,860.0 lbs)
•chain, oblique elevator 1,690.0 kgs (3,718.0 lbs)
• hydraulic power unit (approx) 4,600.0 kgs (10,120.0 lbs)
• accumulator station #1 1,790.0 kgs (3,938.0 lbs)
•accumulator station #2 1,100.0 kgs (2,420.0 lbs)
• piping, drive / machine (approx) 1,000.0 kgs 2,200.0 lbs
• switchgear cabinet 900.0 kgs (1,980.0 lbs)
• control console & control panel 150.0 kgs (330.0 lbs)
• cable & piping (approx) 700.0 kgs (1,540.0 lbs)
Complete with:
• Vertical Flat Die Cross Wedge Rolling Machine model FBQ 100 / 2500a
•FICEP (ITALY) Bar Unscrambling/Feeding system
• Roll Feeding system
• AEG-Elotherm ELOMAT 27/1500/1/N-12P 1,500kW Induction Bar Heating system
• Ficep (Italy) CTCH/PLC 100 Hydraulic Inline Bar/Billet Shearing system
1.) 100mm diameter blank with up to 550mm blank length capacity
2.) Hyd counter pressure attachment produces burr-free, cuts even for short cut-off lengths
3.) Billet positioner at Shear exit
4.) Rollerway to receive the cold bars
5.) Rollerway to mount the induction coils
6.) Bar measuring device
7.) Bar weighing device
8.) Bar loading table
9.) Magazine to discharge bars rejected by the heater
10.) Programmable Logic Controls (PLC) at different stages of automation
•Supply Conveyor
• Discharge Conveyor
•Control Console for Bar Heater and Bar/Billet Shear
•Control Console for the Cross Wedge Rolling Machine
•Twenty Three (23) Spare Induction Heater Coils
•Two (2) Spare Guides Shafts for the Cross Rolling System
•Eight (8) Spare Die and Die Holder Sets
•Twenty to Thirty (20 to 30) volumes of documentation and drawings
It is a complete line from Bar Feeding System to finished rolled product. Designed for the Hot Rolling of workpieces up to 100mm in diameter and a max rolled length of 2,500mm, the machine is suitable for producing Preforms, intermediate and finished formed parts.
Note: A video of this machine running production is available on request.
Oilgear 10,000 PSI Self-Contained Oil-Hydraulic Power Units Skid-Mounted for "On Call" Portable Hydraulic Power
Manufacturer: Oilgear
Need Additional Hydraulic Power? Add additional Hydraulic Power to a Press at any time!
| Reference | 23305-06 |
| Manufacturer | Oilgear |
| Model | Psu(Power Skid Unit) |
| Unit pressure rating | 10,000 PSI |
| Portable Skid Mounted | For ease of movement |
| Oil Resevoir capacity | 500 gallons |
| Motor power/electrics | 300hp/1200rpm/2300volts |
| Skid length | 222" |
| Skid width | 72" |
| Skid height | 98.5" |
| Net weiht of each unit | 18,000 lbs |
Each Self-Contained Hydraulic Power Unit is Skid Mounted and is equipped with the following:
• (2) Oilgear PVL320 5,000 PSI Servo-Controlled pumps
(each pump puts out 162gpm at 5,000 PSI)
•Both pumps on each power unit are driven by a single 300hp 2300V motor
•A servo Regulator is installed which enables the regulating of pressure and speed simultaneously
•High Voltage Motor Starter and electrical system (runs at 50 or 60Hz)
• Controls are GE Vacuum Limitamp Controls
• Valve-Manifold Pressure Control System
•500 gallon Hydraulic Oil Resevoir
• Water cooling system
• Each Unit weihts approximately nine(9) tons
Very Little Usage - One Unit has been used 48 total hours & one 68 total hours.
Pressure can easily be regulated on each side of a press ram.
• (2) Oilgear PVL320 5,000 PSI Servo-Controlled pumps
(each pump puts out 162gpm at 5,000 PSI)
•Both pumps on each power unit are driven by a single 300hp 2300V motor
•A servo Regulator is installed which enables the regulating of pressure and speed simultaneously
•High Voltage Motor Starter and electrical system (runs at 50 or 60Hz)
• Controls are GE Vacuum Limitamp Controls
• Valve-Manifold Pressure Control System
•500 gallon Hydraulic Oil Resevoir
• Water cooling system
• Each Unit weihts approximately nine(9) tons
Very Little Usage - One Unit has been used 48 total hours & one 68 total hours.
Pressure can easily be regulated on each side of a press ram.