VTL's / VBM's / HBM's

17 ft Skoda SK-50A Vertical Boring Mill w/(2) Swivelling Ram Heads, Tracer, Side Head, and Hydrostatic Bearings
Model: SK-50A
Condition: Used
Manufacturer: Skoda
Still installed, this Mill is in very good working condition and is available for immediate inspection and delivery.
Table Diameter4,750mm (187)
Max Turning Diameter-Rams5,180mm (204")
Max Height Under Cross Rail3,264mm (128-1/2")
Max height under live tool3,050mm (120-1/16")
Left Ram Vertical Travel55-1/8"
Left Ram Horizontal Travel116-7/8"
Vertical Ram Swivel+/- 30 to 45 Degrees
Distance between columns204-3/4
Dimensions F-B/L-R/H8370 x 12598 x 9881mm
Machine Weight134 Tons (295,000 Lbs)"
Equipped with:
•(2) Swivelling Ram Heads
•Side Head
•2-Axis Newall DP7 Digital Readout System
•Threading Attachment Inch/Metric
•Electronic Tracer
•Conical Turning
•Constant Surface Cutting Speed
•Hydrostatic Table Bearings
•80 kW Table Drive GE Variable Speed Drive
•Pendant Control
4,640mm (182.7") Morando KS-42-50 Heavy Duty Vertical Turret Lathe Re:23533
Model: KS-42-50
Condition: Used
Manufacturer: Morando
Still installed, this VTL may be inspected on request.
Swing4,640mm (182.7")
Height5,150mm (202.8")
Table dia4,267mm (168")
Workpiece weight175,000 lbs
Main drive motor100hp
Table RPM40 rpm
Cross-rail motor22hp
Rising motor25hp
0
5' Hearth diameter O'Brien & Gere Rotary Hearth Furnace for heating Blanks prior to Forging Re:23955
Model: Re:23955
Manufacturer: O'Brien & Gere
Built new in 1996, this Rotary Hearth Furnace has been removed from service and is available for immediate inspection and delivery.
Reference #23955
ManufacturerO'Brien & Gere
ModelRHBF
Furnace work chamber Hearth diameter - 5'
Furnace work chamber inside height - 18"
Furnace work chamber max piece height - 6.5"
Controls zones Two (2)
Max temperature2,350 deg F
Floor to door sill 48: (adj /- 1-1/2")
Furnace external diameter 10'
Furnace external height 9'
Type of fuel Natural Gas
Furnace weight 15,000 lbs
It was designed to heat the following blanks:
•Anticipated part size 1-3/4" round x 6" long
•Furnace part rate 120 pieces/hour
•Anticipated material Hastalloy X, Titanium, Stainless Steel, Inconel
50 Ton Mavilor Hydraulic Traveling Frame 4-Post Straightening Press previously used for Straightening Crankshafts, Re:23869
Model: Re:23869
Condition: Used
Manufacturer: Mavilor
In excellent condition, this press is available for immediate inspection and delivery. It may be inspected at our Massachusetts warehouse.
Reference #23869
ManufacturerMavilor
ModelN/A
Rated straightening force50 tons
Distance between the tailsocks 1,778mm (70")
Press ram diameter 130mm(5-1/8")
Number of press columns Four (4)
Columns diameter3-1/8"
Method of travel Press moves along carriage
Number of Tail stocks Two (2)
Between the columns23-1/2" W x 36-1/4" L
Max allowable swing approx 16"
Dims110" L x 36" W x 86" H
66" Bullard Dynatrol Vertical Boring Mill Re:23602
Model: 66
Condition: Used
Manufacturer: Bullard
Still installed, this Mill is in very good working condition and is available for immediate inspection and delivery.
Max swing w/side head working66"
Swing w/s-head below table top72"
Min hole ram will enter78"
Centerline Ram-face of bedways9-1/2" w/o turret
Cross rail travel131"
Ram head vert travel (ranges)50"
Side head vertical travel51-3/8"
Side head horizontal travel58-1/4"
Net weight w/cross rail74,000 lbs less heads/motors
It comes complete with Vertical Hydraulic Chuck, "9" Series Allen Bradley Controls, Side Head and a 75hp Main motor drive.
75 ton Traveling Frame 2-Post Hydraulic Straightening Press previously used for straightening crankshafts Re:23870
Model: Re:23870
Condition: Used
Manufacturer: Mavilor
In excellent condition, this press is available for immediate inspection and delivery. It may be inspected at our Massachusetts warehouse.
Reference #23870
ManufacturerMavilor
ModelN/A
Rated straightening force75 tons
Centers distance range1,016 - 5,334mm (40" - 210")
Ram diameter200mm (8")
Distance between press columns1,000mm (40")
Method of travelPress moves alongside bed
Number of tailsocksTwo (2)
Number of press columns Two (2)
Swingapprox 12"
Ram screw diameter4-1/2"
Dims45" W x 236" L x 100"H
75 ton Hydraulic Straightening Press
Twin Tailsocks
Adjustable Steadies
Press travels alongside the bed
Distance between the press columns is about 1,000mm (40").
Dorries VCE 2400 MCFV Carousel type Vertical Turning Lathe with driven tools Re:23850
Model: VCE 2400 MCFV
Condition: Used
Manufacturer: Dorries
This machine was built in the 2008 / 2009 range and is in "Like New" condition. It comes equipped as follows:
Max Swing2,400mm
Face plate2,000mm
Working height2,000mm
Y-Axis+/- 800mm
Speed of face plate2 ? 224 rpm
Forward feed0,1 ? 6.000mm/min
Speed of milling spindle2 ? 2,000 rpm
Max workpiece weight20,000 kgs
Tool magazine capacity60 tools
Main motor power60kW (92.5hp)
Accessories:
• Controls - Siemens 840D
• Direct measuring units
• Hydrostatic slideways of linear axis
• Power driven wheel spindle, pole changing 3 kW
• Chip tray over working height
• Double chip conveyor
• Cooling unit, high and low pressure
• Cleaning of coolant with filters
Extra Large (200 ton workpiece weight) Heavy Duty Gantry Milling & Planing Machine - Re: 22870
Model: Type 6650-0-3
Condition: Used
Manufacturer: Uljanovsk
Built new in the mid 1980's.?
Max workpiece weight200 tons (440,000 lbs)
Table width x length5,000 x 16,000mm
(16.4 ft x 52.5 ft)
Max milling width 5,000mm
Max milling height 4,000mm
Max table travel distance 17,300mm (56.7 ft)
Max planning speed 15,000mm/min (49.2 ft/min)
Max milling speed 3,000mm/min (9.8 ft/min)
Rotation of vertical mandrel45 degree angle
Complete with the following:
• Dbl joint milling head
• Horiz milling head
• Planning head
• Vertical milling head,
• Grinding system/unit
• (2) vibrating units
• (2) lifts w/vert & horiz movement
• Workpiece hoist
GFM FKP 45 Crankshaft Milling Machine w/CNC Control, Re:24185
Model: FKP 45
Condition: Used
Manufacturer: GFM
Built new in 1989, this machine is in very good working condition and is available for inspection under power on request.
Max crankshaft swing diameter470 mm (18.5)
Max crankshaft length5,250 mm (206.7")
Max circular speed3 m/min (118 IPM)
Rapid traverse for spacing 6 m/min (236 IPM)
Milling motor110 kW
Machine length12,600 mm
Machine width5,600 mm
Machine height3,500 mm
Machine weight (w/o electric control box)92 tons
Click on image for more picturesAdd To My Quote Cart
View My Quote Cart"
Heavy Duty 208" Swing Vertical Boring Mills Re:23534 - 35 (2 available)
Condition: Used
Manufacturer: American Style
Still installed, These Boring Mills are available for immediate inspection and delivery.
Swing for O.D. turning195"
Max swing at 61" height208"
Open height75"
Height beneath bridge153"
Bridge stroke78"
Load capacity200,000 lbs
Max table RPM20rpm
Feed range0.002 - 0.392
Rapid traverse21.5" min
Table to column face28"
0
Large "T" Slotted Bolster Plates (2) Re:23985-86
Model: Re:23985-86
Manufacturer: N/A
These two "T" Slotted Bolster Plates are located at our Massachusetts warehosue where they may be inspected on request.
Reference #23985-86
ManufaturerN/A
ModelN/A
Overall width (L-R)230-1/4"
Depth at shoe area (F-B)103-1/2"
Depth at mid section (F-B)72"
Plate thickness6"
Mid Pad dims9"x9"
"T" Slot depth2"
End pad dims9"x14-3/8"
Side pad dims9"x5-3/4"
National 1-1/2" High-Duty Upset Forging Machine (Upsetter) - with A/C & Brake & Auto Tong Feed, 1974 Re:24152
Model: Re:24152
Condition: Used
Manufacturer: National
In very good conditon, this machine is located at our Massachusetts USA warehouse where it may be inspected on request.
Reference#24152
ManufacturerNational
Model1-1/2"
Rated diameter capacity1-1/2"
Stroke9-1/4"
Grip Opening2-11/16"
Gather4"
Hold1-1/4"
Length of die space10-1/4"
Height of die space12'
Tool & Die space14-1/4"
Thickness of each die5-5/8"
Net Weight27,000 lbs.
Serial number 25135 - built new in 1974 in Triffin, Ohio.
Equipped with:
•Auto Tong Feed System
•Air Clutch & Brake
•Over-arm suspended heading and gripping slides
•Automatic Pressurized Trabon Lubrication System
•Adjustable motor platform
•V-belts and motor sheave
•Operators Push-Button Control Station
•Machine guarding
National 1-1/2" High-Duty Upset Forging Machine (Upsetter) - with Air Clutch & Brake, new 1977, Re: 24149
Model: Re:24149
Condition: Used
Manufacturer: National
In very good conditon, this machine is located at our Massachusetts USA warehouse where it may be inspected on request.
Reference #24149
ManufacturerNational
Model1-1/2"
Rated diameter capacity1-1/2"
Stroke9-1/4"
Grip Opening2-11/16"
Gather4"
Hold1-1/4"
Length of die space10-1/4"
Height of die space12"
Tool & die space14-1/4"
Thickness of each die5-3/8"
Net Weight24,600 lbs
Serial number 25146 - built new in 1977 in Triffin, Ohio.
Equipped with:
•Air clutch and brake
•Over-arm suspended heading and gripping slides
•Automatic Pressurized Trabon Lubrication System
•Adjustable motor platform
•V-belts and motor sheave
•Operators Push-Button Control Station
•Machine guarding
VTL 1580 year of manufacture 1967, Kolomna
Manufacturer: Kolomna
Offer:
•Max.work piece dia. 8000mm
•Max. work piece height 3200mm
•Faceplate dia. 7100mm
•Max. travel of the runners of the vertical supports 2000mm
•Max. angular displacement of the supports, degrees - 15 + 30
•Max. work piece weight 125 tons
•Max. cutting effort at the right support 10000kgs
•Max. cutting effort at the left support 8000kgs
•Max. total cutting effort by the two supports 16000kgs
•Max. torque at the faceplate 40000kgm
•RPM of the faceplate - 0,22-18,3
•Limits of the vertical and horizontal feeds - 0,0352-285 mm/min
•The power of the main drive 132kw
•The machine weight 248 tons
© c-sengineering.com

Comments (0) 13.01.2013. 11:06